12.[Sysconf] Command; A) -Print; B) -Plan - Planet Networking & Communication VIP-101T Command Line Interface Manual

PLANET VIP-101T CLI configuration

12.[sysconf] command

This command displays the system information and configuration.
System information and configuration
Usage:
sysconf [-plan digits] [-callalive flag] [-h450 flag] [-keypad type] [-idto time] [-eod type]
sysconf -print
-print Display system overall information and configuration.
-plan Number of digits for dial plan. ( No or positive number 1 ~ 24. )
-callalive Enable or disable auto-disconnection after 10 seconds not receiving packets
from remote party.
-keypad Select DTMF type. ( 0:INBAND, 1:H245ALPHANUMARIC,
2:H245SIGNALTYPE, 3:Q931USERINFO. )
-idto The duration of two pressed digits in dial mode
-eod Digit type of end of dialing. ( 0:No end of dialing,
1:[OK] button, 2:[#} button, 3:[*] button. )
-h450 Enable or disable H.450 related features.
Example:
sysconf -plan 4 -callalive 0 -h450 1 -keypad 2 -idto 5 -eod 0
a) –print
Parameter -print can display system overall information and configuration.
Syntax Description
This command has no arguments or keywords.
Default
This command has no default value.
Example
usr/config$ sysconf -print
System information
DialPlan number of digits: 0
CallAlive auto-disconnection: Disabled
keypad DTMF type: H245SIGNALTYPE
H.450 features: Enabled
Inter-digit time out: 5
Digit type of end of dialing: [ # ] button
usr/config$
b) –plan
- 17 -