Table of Contents
Advertisement
PLANET VIP-101T CLI configuration
-ftp
specify username and password for FTP
Default
This command has no default value
20.[passwd]
For security protection, user has to input the password before entering application
user/config mode. Two configurations of login name/password are supported by VIP-101T.
usr/config$ passwd
Password setting information and configuration
Usage:
passwd -set Loginname Password
passwd -clean
Note:
1. Loginname can only be 'root' or 'administrator'.
2. Only root user has authority to set root password.
3. passwd -clean will clear all passwd stored in flash,
please use it with care. (root user only)
Example:
passwd -set root vip100t
a) –set
Parameter -set is used to configure password for "root" or "administrator" users. Difference
between root and administrator users in VIP-101T is root user has the privilege of
performing firmware upgrade.
Syntax Description
-set
login name password, login name should be root or administrator only.
Default
Null
no password
Example
usr/config$ passwd -set administrator 123
Setting
login: administrator
Password: admin
OK
usr/config$ passwd -set root 321
Setting
login: root
Password: root
OK
- 40 -
Advertisement
Table of Contents
