Audible Tones
Sound 5
Sound 6
Adjustable
Sounds
3-12
Transceiver Controls
Auditory
Information
Signal
Sound
beep beep
every 5
seconds
beep beep
every 2
seconds
Some transceiver sounds can be set to 5 different volume levels (see "Patient
Configurable Settings in Telemetry Setup" on page 9-4). The adjustable sounds
include SpO
Spot Check measurement complete/fail, Check/Standby functions,
2
and pulse detection tone. The Spot Check and pulse detection tones can be
turned off (muted) on a per patient basis in the Telemetry Setup window.
Auditory
Signal
(sound)
Function
Sound 1
Spot Check
(beep)
Sound 1
Check
(beep)
Button
No Mute
Sound 2
Pulse
(low pitch
Detection
tone)
Tone
How Used
Indicates transceiver is out of range or not
associated with a sector. Sound stops when
contact is re-established with the Information
Center, or it can be silenced by pressing the
Check button for six seconds.
Indicates that the leadset is not inserted
correctly.
How Used
Announces a successful SpO
measurement.
Confirms contact with the Information Center.
Indicates pulse during SpO
measurement.
Spot Check
2
Spot Check
2