Philips IntelliVue TRx Instructions For Use Manual page 165

Unit Settings - Telemetry Setup
Control Function
SpO Mode Determine the transceiver SpO
2
behavior.
Note—
Wave are not available in Spot
Check.
Pulse Rate and Pleth
Telemetry Functions at the Information Center & TeleMon
Telemetry Functions at the Information Center
Settings
Spot Check - Provides
2
manual measurements so the
clinician can check as
needed. Measurement
initiated by plugging the
SpO cable into the
2
transceiver or by selecting
Spot Check SpO
Patient Window. No pulse or
successful/failed
measurement tones are
generated when measurement
is initiated at Information
Center.
Continuous - Sends an SpO
parameter value to the
Information Center every
second. If selected, Pulse
Rate and Pleth Wave may
also be sent.
Factory
Default
Spot Check
icon in the
2
2
9-11