Measuring ECG
6-6
ECG Monitoring
If you are using ...
5-wire (EASI mode)
these leads can be selected at the
Information Center
I, II, III, aVR, aVL, aVF, V1, V2, V3, V4, V5,
V6
In EASI mode, the sourced (raw) waves are
received as:
•
Channel 1 = Vector 1 (A-I)
•
Channel 2 = Vector 2 (A-S)
•
Channel 3 = Vector 3 (E-S)
Defaults are II, V2, III, V5.
Arrhythmia monitoring is performed only
Note—
on the primary and secondary leads selected at
the Information Center, although you can view
and perform ST analysis on all 12 EASI derived
leads.