Codabar; Code 93; Interleaved 2 Of 5 - Psion Teklogix 7545 User Manual

Appendix C: Bar Code Settings
Imager

Code 93

C.4.9 Code 93
Enabled
Set this parameter to on to enable "Code 93".
Length Restriction
Refer to "Length Restriction" on page C-14 for details.
Add/Remove Data
Refer to "Add/Remove Data" on page C-14 for details.
C.4.10 Codabar
Enabled
Set this parameter to on to enable "Codabar".
Length Restriction
Refer to "Length Restriction" on page C-14 for details.
Add/Remove Data
Refer to "Add/Remove Data" on page C-14 for details.
C.4.11

Interleaved 2 of 5

Enabled
Set this parameter to on to enable "Interleaved 2 of 5".
Check Digit Verification
When enabled, this parameter checks the integrity of an I 2 of 5 symbol to ensure it complies
with a specified algorithm – either USS (Uniform Symbology Specification) or OPCC (Op-
tical Product Code Council).
Include Check
If this parameter is enabled, the check digit is transmitted along with the I 2 of 5 symbol.
Length Restriction
Refer to "Length Restriction" on page C-14 for details.
C-48 Psion Teklogix 7545 Hand-Held Computer User Manual
Preliminary Draft 3