Ean 13; Ean 8 - Psion Teklogix 7545 User Manual

Appendix C: Bar Code Settings
Non-Decoded Scanners

EAN 13

Add/Remove Data
Refer to "Add/Remove Data" on page C-14 for details.
C.5.4 EAN 13
Enabled
Set this parameter to on to enable "EAN 13" or off to disable it.
Enable Bookland EAN
Setting this parameter to on allows your scanner to recognize Bookland EAN bar codes.
Include Country
If this parameter is enabled, the country code is included with the decoded bar code data.
Include Check
If this parameter is enabled, the check digit is included with the decoded bar code data.
Addendum
Important: Before "Addendum" can take effect, the "Short Code" parameter (see
An addendum is a separate bar code, supplementary to the main bar code. This parameter
provides three options: Disabled, Optional and Required. Depending on the value chosen for
this parameter, an addendum is recognized or ignored.
• Double-tap on Addendum to display a dialog box listing your options.
• Highlight an item, and tap on OK.
When "Addendum" is set to Disabled the scanner does not recognize an addendum. If this
parameter is set to Optional the scanner searches for an addendum and if one exists, appends
it to the main bar code. When the parameter is set to Required the scanner does not accept
the main bar code without an addendum.
Note: Setting Addendum to Optional will reduce performance. This value should only be
used if some bar codes actually have addendums.
C-58 Psion Teklogix 7545 Hand-Held Computer User Manual
Preliminary Draft 3
page C-55) must be enabled.