Ean 13 - Psion Teklogix 7545 User Manual

Preliminary Draft 3
Appendix C: Bar Code Settings
Decoded (Intermec ISCP)

EAN 13

code will be transmitted as a single code. If both codes in a pair are detected, they will be
concatenated provided that "ISBT Concat Any Pair" (see below) is enabled.
ISBT Concat Any Pair
Enabling this parameter causes all code pairs that can be, to be concatenated even if they do
not comply with Section 4.1 of the "ISBT 128 Bar Code Symbology and Application Speci-
fication for Labeling of Whole Blood and Blood Components" (June 2000, Version 1.2.1).
Reading Range
Determines the reading distance from which a bar code can be successfully scanned. The
default setting, Extended, allows for increased reading distance.
Check Digit Verification
The available options for this parameter are Disabled or French CIP. This parameter uses
the specified algorithm of the option you've chosen to ensure the integrity of the symbol data
before transmitting. If the data does not contain that algorithm, the data is not transmitted.
Note: French CIP (French pharmaceutical) is only used with bar codes containing
7 characters.
Minimum Length
Minimum lengths for the bar code can be set from 0 to 255. The length of a code refers to
the number of characters (i.e., human readable characters), including check digit(s).
Length Restriction
Refer to "Length Restriction" on page C-14 for details.
Add/Remove Data
Refer to "Add/Remove Data" on page C-14 for details.
C.3.5 EAN 13
Enabled
Set this parameter to on to enable "EAN 13".
ISBN Conversion
When this parameter (International Standard Book Number) is enabled, the first 3 characters
('978') are ignored and the checksum (0.9, 'X') is calculated on the remaining characters.
Psion Teklogix 7545 Hand-Held Computer User Manual C-29