Siemens SIMATIC IPC477D Operating Instructions Manual page 221

Interfaces
COM 1
DVI
Display port (DPP)
Keyboard
Mouse
USB
PROFIBUS/MPI
•
•
PROFINET
Ethernet
For unique labeling, the Ethernet ports are numbered on the enclosure. The numbering by the
1
operating system can differ.
Teaming can be set and initiated in the configuration interface. In teaming operation, jumbo
2
frames, e.g. for the camera application, are not supported.
SIMATIC IPC477D, IPC477D PRO
Operating Instructions, 11/2016, A5E31347228-AF
Transmission rate
Operating modes
1
RS 232, max. 115 kbps, 9-pin, D-sub connector
Connection of display devices with DVI connection
Connection of display devices with DPP connection
Connection via USB port
Connection via USB port
Back of device:
4 × USB 3.0
•
Max. 1 high-current can be operated at the same time
•
Max. 5 W for all USB devices
•
9-pin, 2-row, electrically isolated, D-sub socket, CP 5622 com-
patible
9.6 kbps to 12 Mbps
•
DP master: DP-V0, DP-V1 with SOFTNET-DP
•
DP slave: DP-V0, DP-V1 with SOFTNET-DP slave
3 x RJ45 connection, CP 1616 compatible onboard interface
based on ERTEC 400
10/100 Mbps, isolated
2 x RJ45 connection, Intel 82579LM and Intel 82574L
10/100/1000 Mbps, electrically isolated, teaming-capable
Or
For PROFINET variants:
1 x Ethernet RJ45, Intel 82579LM
Technical information
8.4 Technical specifications
2
221