Siemens SIMATIC IPC477D Operating Instructions Manual page 52

Mounting and connecting the device
3.1 Preparing for mounting
● Inclined installation in horizontal format with a vertical inclination of maximum ±45 °
In an inclined mounting position, the device enclosure satisfies the requirements of a fire
protection enclosure.
In an inclined mounting position, operation of the DVD drive is not permitted.
● Upright mounting in vertical format (only permitted for the built-in unit)
Display rotated 90° vertical from the standard position. The power supply is located at the
top.
1
52
CAUTION
Fire protection enclosure requirement not fulfilled
In the "Upright mounting in vertical position" mounting position, the device enclosure
does not satisfy the requirement of a fire protection enclosure.
If you want to operate the built-in unit in this mounting position, check if the built-in unit
has to meet the requirement for a fire protection enclosure in the desired operating area.
If in doubt, install the built-in unit in an enclosure that is compliant with the requirements
of sections 4.6 and 4.7.3 of the IEC/UL/EN/DIN-EN 60950-1 standard.
DVD operation not permitted
Operation of the DVD drive is not permitted in the "Upright mounting in vertical position"
mounting position.
For temperature specifications, see section "Environmental conditions (Page 213)".
SIMATIC IPC477D, IPC477D PRO
Operating Instructions, 11/2016, A5E31347228-AF