Siemens SIMATIC IPC477D Operating Instructions Manual page 172

Maintaining and servicing your device
7.5 Installing the software
Change system language
1. Connect a USB DVD-ROM drive to the device, if necessary.
2. Insert the Restore DVD into the DVD drive.
3. Restart the device and press "F2" to access BIOS.
4. Switch to the "Boot" menu and select the setting "USB Boot" = "Enabled".
5. Switch to the "Exit" menu and select "Exit Saving Changes".
6. Restart the device and press the "F12" key until you are in the "Boot Manager".
7. Select the DVD drive and press "Enter" to boot from the DVD drive.
8. Follow the instructions on the screen.
9. After selecting the menu dialog language of the Restore DVD, select the menu entry
"Manage language packages".
Depending on the current language setup, you have the following options in the "Manage
language packages" menu:
– Display language settings
– Install language
– Change language
– Uninstall installed language
172
SIMATIC IPC477D, IPC477D PRO
Operating Instructions, 11/2016, A5E31347228-AF