Siemens SIMATIC IPC477D Operating Instructions Manual page 93

Procedure
Similar to figure
SIMATIC IPC477D, IPC477D PRO
Operating Instructions, 11/2016, A5E31347228-AF
Mounting and connecting the device
3.4 Connecting the device
Switch off the 24 V DC power
supply.
Connect the wires of the power
supply.
Plug the connecting terminal into
the connection socket at the indi-
cated position.
The connecting terminal must
snap into the connection socket.
Secure the power supply cable to
the strain relief with a cable tie.
93