Windows Embedded Standard - Siemens SIMATIC IPC477D Operating Instructions Manual

7.5.1.4

Windows Embedded Standard

General installation procedure
If your software becomes corrupt for any reason, you can reinstall it from the Restore DVD.
The Restore DVD contains an image file for the device memory with the original software
package (operating system with installed hardware drivers).
Note
You require a USB keyboard and a USB DVD-ROM drive to reinstall the operating system.
Before performing the new installation, you should check the date and time set in the BIOS
Setup, "Main" menu, and correct these if necessary.
Setting up language selection
You can change the language using the supplied Restore DVD. The Restore DVD contains
the required language packages and help for changing the system language.
Note
Note the license terms of Windows Embedded Standard 7
Note the license terms for Windows Embedded Standard 7 and especially the extended
software terms of the Siemens AG.
You can find the license terms in the delivered document "MICROSOFT SOFTWARE
LICENSE TERMS for Windows Embedded Standard 7" and in the system drive under
\Windows\System32\license.rtf.
SIMATIC IPC477D, IPC477D PRO
Operating Instructions, 11/2016, A5E31347228-AF
Maintaining and servicing your device
7.5 Installing the software
171