Mounting The Device With Mounting Brackets - Siemens SIMATIC IPC477D Operating Instructions Manual

3.2.4

Mounting the device with mounting brackets

If there are strict requirements for the front seal, it may be necessary to fasten the device
with mounting brackets in a cabinet. You can secure each device with 6 mounting brackets.
The mounting brackets are available as accessories. You can find ordering information in the
section Accessories (Page 32).
Requirement
● All packaging components and protective films have been removed from the device.
● The accessory mounting brackets are available.
● 2.5 mm hexagonal spanner
Procedure
Note
If the mounting seal is damaged or protrudes over the device, the degree of protection is not
guaranteed.
1.
SIMATIC IPC477D, IPC477D PRO
Operating Instructions, 11/2016, A5E31347228-AF
Working from the front, insert the device
into the mounting cut-out.
Mounting and connecting the device
3.2 Installing the built-in unit
65