Functional characteristics
MMA welding
5.3
MMA welding
5.3.1
Selection and adjustment
Operating
element
5.3.2
Hotstart
The hotstart device improves the ignition of the stick electrodes using an increased ignition current.
a) = Hotstart time
b) = Hotstart current
I =
Welding current
t =
Time
5.3.2.1
Hotstart current
Operating
element
54
Action
Result
Select MMA welding process
The
Set welding current
Action
Result
Select hotstart current welding parameter
x x
Press until hotstart current signal light
Set hotstart current
The factory setting is a value as a percentage of the
selected main current. To set an absolute value for the
hotstart current, see chapter "Advanced settings".
signal light lights up in green
AMP%
Displays
Display shows the
last current value
used for welding.
Welding current is
displayed.
Displays
comes on
Item No.: 099-000108-EWM01
Need help?
Do you have a question about the TETRIX 351 AC/DC COMFORT activArc and is the answer not in the manual?