Save Welding Tasks (Jobs); Displaying And Changing The Job Number - EWM TETRIX 351 AC/DC COMFORT activArc Operating Instructions Manual

Operating
element
5.1.2

Save welding tasks (JOBs)

You can select, change and save the required welding parameters for recurring welding tasks (JOBs) in
up to 7 JOBs (JOB 1 to JOB 7).
5.1.2.1

Displaying and changing the JOB number

Operating
element
The procedure for setting welding tasks is the same as described under "Manual,
standard operation (JOB 0)". The "Alternating current balance (TIG AC)" and "Tungsten
electrode diameter/Ignition optimisation" rotary dials are the exception. These welding
parameters are set in JOB 1 to 7 in the function sequence (the signal lights of the same
names indicate selection).
A JOB can only be switched if no welding current is flowing.
The up-slope and down-slope times can be set separately for non-latched and latched.
Item No.: 099-000108-EWM01
Action Result
Set alternating current balance (TIG AC only)
Select welding parameter in the functional sequence
Set welding parameters
Action Result
Select JOB display
X x
Change the JOB number
If the display switchover is pressed or if there is
1 x
no keyboard input for 5 seconds, the new JOB
will be active
Functional characteristics
NOTE
Operating concepts
Display
JOB number
JOB number
JOB number
29