Functional characteristics
Menus and sub-menus on the machine control
5.8.3
Machine configuration menu
0
1
ENTER (enter the menu)
•
Switch off machine at the main switch
•
Press and hold the "welding parameters" button and switch the machine on again at the
same time.
NAVIGATION (navigating in the menu)
•
Parameters are selected by pressing the "welding parameters" button.
•
Set or change the parameters by turning the "welding parameter setting" rotary dial.
EXIT (leave the menu)
•
Select the "Elt" menu item.
•
Press the "welding parameters" button (settings will be applied, machine changes to the
ready-to-operate status).
66
0
1
Figure 5-24
NOTE
Item No.: 099-000108-EWM01
Need help?
Do you have a question about the TETRIX 351 AC/DC COMFORT activArc and is the answer not in the manual?