Measuring Instrument; Starter Coil; Pulsar Coil; Ignition Coil - Royal Enfield Classic 500 2009 Service Manual

Checking Procedure of Electrical Eomponents
✰ Stator coil
✰

Pulsar coil

✰

Ignition coil

✰
Suppressor Cap
✰
Battery
✰
Horn
✰
Relay Starter
✰ Starter motor
✰ IC Flasher
✰ RR Unit

MEASURING INSTRUMENT

✰ Multimeter

STARTER COIL

✰ ✰ ✰ ✰ ✰ SPECIFICATION
Resistance mode - Across any two wires
✰ ✰ ✰ ✰ ✰ CHECKING PROCEDURE
Set the multimeter in resistance mode.
Check the Resistance between wires
a. Yellow 1 to yellow 2 - 0.8 to 1.5 ohms
b. Yellow 2 to yellow 3 - 0.8 to 1.5 ohms
c. Yellow 3 to yellow 1 - 0.8 to 1.5 ohms
PULSAR COIL
✰ ✰ ✰ ✰ ✰ SPECIFICATION
Resistance mode - Across the wires
180 - 240
✰ ✰ ✰ ✰ ✰ CHECKING PROCEDURE
Set the multimeter in resistance mode.
Check the Resistance between
a. Green to white wire.
IGNITION COIL
✰ ✰ ✰ ✰ ✰ SPECIFICATION
Resistance mode across
a. Between Brown to Red/white 4 to 8
ohms.
b. Between Brown to HT lead 12.5 to 16
Kilo Ohms.
✰ ✰ ✰ ✰ ✰ CHECKING PROCEDURE
Set the multimeter in resistance mode.
Check the Resistance between
a. Brown to Red/white(Primary)
b. Brown to HT lead (Secondary)
10-7
(ohms).