Royal Enfield Classic 500 2009 Service Manual page 152

Engine Dismantling, Inspection & Assembly
✰
Assemble inlet
pushrods.
✰
Assemble the inlet and exhaust
rocker bearing with dowel and
tighten allen screws
✰
Assemble the Inlet & Exhaust
Rocker covers, dowels & rubber
gasket then tighten rocker cover bolt
with rubber washer (Torque 1 KG-
M)) .
and exhaust
05-69
✰
Assemble tappet door by applying
LOCKTITE 5699 RTV silicon gasket
on Crank case RH then tighten
screws (Torque 0.60 KG-M).
✰ Tighten the swing arm nut to
specified torque.