Table of Contents
Advertisement
Zoom
To create a new zoom trace, touch then drag
diagonally to draw a selection box around the
portion of the trace you want to zoom. Touch
the Zx descriptor box to open the zoom factor
controls and adjust the zoom exactly.
To "zoom in" on any trace,
unpinch two fingers over the
trace horizontally.
To "zoom out" on any trace,
pinch two fingers over the
trace horizontally.
USER INTERFACE
Turn Off
To turn off a trace, flick the trace descriptor box toward the bottom of
the screen.
To turn off a measure parameter or Pass/Fail qualifier, flick the Px or Qx cell
toward the bottom of the screen. If it's the last active cell of the table, the
table will close.
25
Advertisement
Table of Contents
