Table of Contents
Advertisement
A drop-down menu bar lets you access set up dialogs and other
functions. All functionality can be accessed through either the menu
bar or other shortcuts. The Q-Scape control at the right lets you quickly
switch display modes.
If an action can be "undone" (such as recalling a setup), a small
Undo button appears at the far right of the menu bar. Click this to
return to the previous oscilloscope display.
The grid area displays the waveform traces. It can be configured to show
different grid styles. Q-Scape tabs appear along the top of each grid area
when in Q-Scape display modes.
Cursors show where measurement points have been set. Touch-and-drag
cursors to quickly reposition the measurement point.
Trigger Level and Trigger Time indicators appear at the edge of the grid
when a trigger is set, color-coded to match the input.
Trace Descriptor boxes appear along the bottom of the grid area, one for
each open trace. They adjust in size and detail as more are opened.
The Add New box sits next to the trace descriptor boxes. Use it to turn on
new traces or the Measure table. See MAUI with OneTouch on p.21.
HD Descriptor box shows the ADC resolution at which the oscilloscope is
operating.
Timebase and Trigger descriptor boxes appear at the right of the display.
Timebase and Trigger settings only apply to channel traces. Touch the
descriptor box to open the corresponding set up dialog.
Dialogs appear at the bottom of the display for entering set up data. The
top dialog will be the main entry point. Related dialogs appear as a series
of tabs behind the main dialog.
A toolbar along the bottom of the main Channel, Math, Memory and
Digital dialogs applies common actions so that you don't have to leave
the underlying dialog. They always apply to the active (highlighted) trace.
USER INTERFACE
Apply up-to-12 measurement parameters.
Display a zoom of the trace.
Apply a math function to the trace.
Open the Serial Decode dialog.
Copy the active trace to the corresponding
internal memory (e.g., C2 to M2).
Scale the waveform to fit the grid.
Move the active trace to the next grid.
Apply a custom label to the trace.
17
Advertisement
Table of Contents
