Operation
1
Operation
The controller is ready for use with the temperatures and operating schedules preset by the
manufacturer.
On start-up, the current time and date need to be adjusted at the controller (–> section 1.5).
1.1
Operating elements
The operating controls are located in the front panel of the controller and protected by a
Plexiglas door with an integrated quick guide.
1.1.1 Rotary pushbutton
*
1.1.2 Rotary switches
Rotary switch for "Configuration and parameterization"
6
EB 5433 EN
Rotary pushbutton
Turn q:
Display, select parameters and function blocks
Press
:
Confirm adjusted selection or settings
COPA Switch to configuration and parameter level
Times-of-use for DHW circulation pump
DHW temperature set point
Day set point (rated room temperature)
Night set point (reduced room temperature)
Times-of-use for heating
Controller time: setting the current time, date and year
INFO Switch to information level
(view measured values and their set points/limit values)