1.4
Displaying data
The time and temperature values of connected sensors and their set points can be retrieved
and displayed in the info level.
Proceed as follows:
Turn rotary switch "Configuration and parameterization" to INFO.
Display shows: time _ _:_ _
The black squares below the row of numbers at the top of the display in this case repre-
sent the times-of-use.
q
Depending on the configuration of the controller, different data points are displayed in
info level.
Room temperature, RS
Outdoor temperature, AS
/
Temperature at flow sensor VS1, heating circuit/primary exchanger circuit
Temperature at return flow sensor RüS
/
Temperature at flow sensor VS2, DHW circuit (Anl 3 to 5)
,
Temperature at storage sensor (Anl 2 to 4)
Temperature at return flow sensor RüS_TW (Anl 5)
Compare the set point/limit temperature and the actual temperature.
Operation
9
EB 5433 EN