Installing A Memory Card Fitting - Siemens SIMATIC IPC427D Operating Instructions Manual

Device maintenance and repair
7.3 Installing and removing hardware
7.3.2.2

Installing a memory card fitting

A memory card fitting for a second CFast memory card is available for the device. You can
install the memory card rack instead of the HDD or SSD.
The type of memory card to be used is described in "Installing and removing CFast cards
(Page 76)."
Requirement
● The device is disconnected from the power supply.
● The device is removed.
● 1 T10 screwdriver
Procedure
Removal
1. Remove the screws shown.
Push off the cover in the direction indi-
cated and lift it off.
2. Remove the screws shown.
3. Remove the HDD or SSD from the enclo-
sure.
90
Operating Instructions, 05/2017, A5E31347215-AB
SIMATIC IPC427D