Siemens SIMATIC IPC427D Operating Instructions Manual page 49

Document name
Manual
SIMATIC NET Industrial Communication
with PG/PC: Volume 1 - Basics
SIMATIC NET Industrial Communication
with PG/PC: Volume 2 - Interfaces
S7 CPs for Industrial Ethernet
Configuring and Commissioning
Manual
SIMATIC NET - Twisted Pair and Fiber-
Optic Networks
This documentation is part of the included USB stick:
Operating instructions
CP 1616/CP 1604/CP 1616 onboard
Installation guide
Device Driver CP16xx.sys
Further information
You can find the information on specific products in the Internet at the address: Product-
related Information SIMATIC NET (http://www.siemens.com/simatic-net)
SIMATIC IPC427D
Operating Instructions, 05/2017, A5E31347215-AB
Installing and connecting the device
What is contained in this document?
This manual introduces you to industrial communica-
tion and explains the available communication proto-
cols. It also describes the OPC interface as an
alternative to the IO-based user programming inter-
face.
This provides the following support:
- For commissioning S7 stations
- For establishing effective communication
Configure and build your Industrial Ethernet networks
based on this document.
This provides you with all information required for
operation.
Read this guide if you want to install the NDIS device
driver, CP16xx.sys.
3.3 Connecting the device
49