Siemens SIMATIC IPC427D Operating Instructions Manual page 155

"AMT Configuration" submenu
Entry
Manageability Feature Selection
SOL/IDER/KVM
User Consent
Password Policy
Network Setup
Activate Network Access
Unconfigure Network Access
Remote Setup And Configuration
Power Control
SIMATIC IPC427D
Operating Instructions, 05/2017, A5E31347215-AB
Meaning
Enable and disable all AMT features.
Enable and disable the features SOL, IDE redirection, KVM.
User consent settings. Forces the following additional security
behavior: When a user attempts to establish a KVM connection
remotely, a six-figure number is displayed on the AMT PC. The
remote user must enter this number on the help desk PC before
the KVM connection can be opened.
Password policy that specifies the conditions under which the
password can be changed from a remote location.
Network settings, for example DHCP, IP address, host name,
domain name.
Activates the network interface. This menu entry only exists if
the network is not activated.
Deactivates the network interface and resets the network set-
tings to their default values.
Displays the current provisioning settings.
Specifies the power states S0, S3, S4 of the computer in which
the ME is activated.
Technical specifications
8.7 BIOS description
155