3.3.10
Securing the lines
Secure each line connected to the device to the strain relief using a cable tie. The cable ties
required are not included.
Requirement
● Up to 6 cable ties for USB, Ethernet and PROFIBUS
Cable tie width 3 mm max.
● 1 cutting tool
Procedure
1. Pass the cable tie around the strain relief
bar and secure the cables as shown.
2. Cut off the protruding ends of the cable
ties.
SIMATIC IPC427D
Operating Instructions, 05/2017, A5E31347215-AB
Installing and connecting the device
3.3 Connecting the device
51