Installing Memory Modules - Siemens SIMATIC IPC RW-543A Operating Instructions Manual

Expanding and assigning parameters to the device
6.3 Memory modules
6.3.2

Installing memory modules

Requirement
• You have noted the information on combination options and the conditions of use of
memory modules under "Usable memory modules (Page 53)".
• The device is open, see important information in "Open the device (Page 49)".
• If necessary, the expansion cards may be removed for easier access to the memory
modules, see "Changing the power supply (Page 67)".
To install the memory module
• Only install memory modules designed for the default motherboard.
• Recommend selecting
• Unplug the power cord from the power outlet before installing Memory Module.
• A memory module can be installed only when the direction is correct. Switch the
• DDR2 and DDR3 memory modules are not compatible. Please
54
WARNING
memory modules with the same brand, capacity, speed, and chips if you use
multiple Memory Modules.
direction if the memory cannot able to be inserted into the memory socket.
make sure to install DDR4 Memory Module on this motherboard.
Operating Instructions, 03/2023, A5E52332059-AA
SIMATIC IPC RW-543A