Australia Class B; Declaration Of Conformity; Electromagnetic Compatibility, Industrial And Residential Areas - Siemens SIMATIC IPC427D Operating Instructions Manual

8.1.1

Australia Class B

RCM AUSTRALIA/NEW ZEALAND
This product meets the requirements of EN 61000-6-3 Generic standards - Emission
standard for residential, commercial and light-industrial environments.
This product meets the requirements of the standard EN 61000-6-3 Generic standards -
Emission standard for residential, commercial and light-industrial environments.
KOREA
This product meets the requirements of Korean certification.
This product satisfies the requirement of the Korean Certification (KC Mark).
이 기기는 업무용(A급) 전자파 적합기기로서 판매자 또는 사용자는 이 점을 주의하시기
바라며 가정 외의 지역에서 사용하는 것을 목적으로 합니다.
8.2

Declaration of conformity

The device meets the guidelines listed in the following sections.
EU Declaration of Conformity
The associated declaration of conformity is available on the Internet at the following address:
EC Declaration of Conformity, UL approval Canada/USA
(https://support.industry.siemens.com/cs/ww/en/ps/16756).
8.2.1

Electromagnetic compatibility, Industrial and Residential Areas

Electromagnetic compatibility
This product meets the requirements of EC Directive 2004/108/EC "Electromagnetic
Compatibility".
The device is designed for the following areas of application corresponding to the CE
marking:
Scope of application
Industrial area
Residential and commercial areas
and small businesses
SIMATIC IPC427D
Operating Instructions, 05/2017, A5E31347215-AB
Requirements for
Interference emission
EN 61000-6-4
EN 61000-6-3
Technical specifications
8.2 Declaration of conformity
Immunity to interfer-
ence
EN 61000-6-2
EN 61000-6-1
107