Installing The Strain Relief - Siemens SIMATIC IPC427D Operating Instructions Manual

Installing and connecting the device
3.3 Connecting the device
3.3.9

Installing the strain relief

Strain relief for the device is provided in the scope of delivery. The strain relief is designed to
prevent the lines connected to the device from being accidentally pulled out.
Requirement
● 1 strain relief
● 2 screws
● 1 T10 screwdriver
Procedure
Mounting
1. Remove the marked countersunk screws.
2. Fasten the strain relief at the points
shown.
Use the oval head screws included with
the strain relief.
Removing
Follow the mounting procedure in reverse to remove the strain relief.
50
Operating Instructions, 05/2017, A5E31347215-AB
SIMATIC IPC427D