Design Of The Device; Interfaces And Operating Elements - Siemens SIMATIC IPC427D Operating Instructions Manual

1.2

Design of the device

1.2.1

Interfaces and operating elements

Device with PROFIBUS or CAN interface
①
On/off switch
②
24V DC
③
Protective conductor
④
Memory card slot
⑤
4 × USB
⑥
Display port
⑦
DVI-I
⑧
2 × Ethernet
⑨
COM1
⑩
COM2
⑪
PROFIBUS DP/MPI or
CAN fieldbus
SIMATIC IPC427D
Operating Instructions, 05/2017, A5E31347215-AB
The on/off switch does not isolate the device from the power supply. Position
"ON", when the "_" symbol is pressed. Position "OFF" is the delivery state.
Power supply connection
Protective conductor terminal
Cover for the CFast card
USB 3.0 high current, backward compatible with USB 2.0/1.1
DisplayPort connection for digital monitor
DVI connector for CRT or LCD monitor with DVI port
RJ45 Ethernet connection 1 (exclusive PCI interrupt) for 10/100/1000 Mbps or
RJ45 Ethernet connection 2 (shared PCI interrupt) for 10/100/1000 Mbps (not
with PROFINET versions)
Serial interface
Serial interface (optional)
PROFIBUS DP/MPI interface (RS 485, electrically isolated), 9-pin Sub-D sock-
et or CAN fieldbus (optional; not for devices with PROFINET)
Overview
1.2 Design of the device
17