Parameter 02: Receiver Computer Type - Honeywell FBII CP-220A Hookup And Installation Instructions

Central station receiver
Table of Contents

Advertisement

PARAMETER 02:
Receiver Computer
Type
SELECTING RADIONICS OR ADEMCO FOR PARAMETER 02
RECEIVER
FORMATS WHICH CAN BE PROCESSED
RADIONICS
•all pulsed formats with 3-digit Account Numbers
•all RADIONICS-based formats
ADEMCO
•all pulsed formats
•all ADEMCO-based formats
NOTE 1: If this parameter is left as factory programmed (FBI), all formats that the receiver is
capable of processing (see Appendix B) will be accepted by any and all Line Cards used in
the CP-220A. Unless there are compelling reasons to do otherwise, select FBI for
PARAMETER 02.
NOTE 2: Leave PARAMETER 02 as factory programmed (FBI) if no Automation System is
being used.
Page 2-76 Section 2: Programming the CP-220A CP-220A Central Station Receiver
RECEIVER TYPE FBI
Background:
Like the CP-220A, the hardware and software used with an Automation
System must also be customized to perform properly in the Central Station.
In terms of its software, most automation "packages" need to know which
Central Station Receiver will be providing the data to be processed.
Although the CP-220A is considered to be an FBI Receiver, it has the ability
to emulate the receivers of two other manufacturers: the RADIONICS 6000
and the ADEMCO 685. Use PARAMETER 02 if you either require, or
desire, to change the CP-220A's "receiver emulation."
Choosing a receiver emulation other than FBI imposes certain restrictions
on the Reporting Formats the CP-220A can process. The table below shows
the restrictions imposed by selecting either ADEMCO or RADIONICS in
this parameter. A listing of all the Reporting Formats capable of being
processed by the CP-220A is detailed in Appendix B.
Programming Procedures:
Use the NEXT key or the MANUAL/PREVIOUS key to alternate among
[FBI], [RADIONICS], and [ADEMCO].
Default:
PARAMETER 02 is defaulted to [FBI].
Hook-Up and Installation Manual
Advancing to Next Parameter:
MM/DD/YY HH:MM:SS
FORMATS WHICH CAN'T BE PROCESSED
•formats using 4-digit Account Numbers
•ADEMCO-based formats:
•High-Speed
•Express
•FBI Superfast
•SILENT KNIGHT FSK
•RADIONICS BFSK formats
•ACRON Superfast
•SILENT KNIGHT FSK
• Contact I.D.
•ACRON Superfast
•SESCOA Fast
•FBI Superfast
•SESCOA Fast

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents