Table of Contents
Advertisement
REMEMBER!
To leave the Programming
Mode at any time, press
the Esc key. Doing so will
return the CP-220A to its
normal operating mode.
Programming changes will
be stored automatically.
PARAMETER 41:
Message
Spaces
Page 2-68 Section 2: Programming the CP-220A CP-220A Central Station Receiver
Default:
The CP-220A is defaulted to [PRINTER FAIL / MAN ON].
Advancing to Next Parameter:
The next parameter in Category B is PARAMETER 41. Because it is not
sequential, it cannot be reached with a single press of the
to PARAMETER 41, press the N key.
The CP-220A displays the parameter just programmed ([PARAMETER
NUMBER 38]) with its first digit flashing, indicating its request for the next
parameter number.
You can reach PARAMETER 41 by pressing either:
• 4 then 1 , or
• the
NOTE: When the
immediately – not its number.
MESSAGE SPACE 1 LINES MM/DD/YY HH:MM:SS
Background:
Like PARAMETER 35 (see page 2-65), PARAMETER 41 relates to the
appearance of the printout produced by the CP-220A's attached printer.
PARAMETER 41 determines the number of blank lines (called spaces) that
will "be printed" between separate phone calls or unrelated events. This
can help you determine the most desirable appearance of the printout, while
keeping in mind the conservation of paper. Because the ultimate appearance
of the printout is determined by the printer settings and by PARAMETER
35, a range of possibilities has been made available in the accompanying
table on page 2-69. Refer back to PARAMETER 35 on page 2-65 for
additional background information.
Programming Options:
PARAMETER 41 offers a range between [0] and [9], representing the
number of "spaces" that will be skipped between unrelated events on the
printout. The following table summarizes the interaction between the
printer and PARAMETERS 35 and 41, and references several sample
printouts.
key three times
is used, the name of the next parameter appears
Hook-Up and Installation Manual
key. To advance
Hide quick links:
Advertisement
Table of Contents
