Parameter 47: Fbi English - Honeywell FBII CP-220A Hookup And Installation Instructions

REMEMBER!
To leave the Programming
Mode at any time, press
the Esc key. Doing so will
return the CP-220A to its
normal operating mode.
Programming changes will
be stored automatically.
PARAMETER 47:
FBI English
Page 2-44 Section 2: Programming the CP-220A CP-220A Central Station Receiver
The CP-220A displays the parameter just programmed ([PARAMETER
NUMBER 44]) with its first digit flashing, indicating its request for the
desired parameter number. Press either:
• 4 then 7 , or
• then 7 , or
• the key three times
NOTE: When the
immediately – not its number.
FBI ENGLISH 0 ZERO
Background:
Fire Burglary Instruments has developed a Central Station reporting format
that is transmitted exclusively by FBI control products and is known as FBI
Superfast (sometimes called 4x1x2x1 [4 by 1 by 2 by 1] because of the way its
characters are sent).
FBI Superfast enables the reporting of up to 256 unique zone codes (and/or
user codes for openings and closings) instead of the 15 possible zone (and
user) codes provided by most other formats. In addition, FBI Superfast uses
TouchTones®, rather than rotary pulses, to convey the signal – resulting in
a rapid transmission rate. Overall, the FBI Superfast format offers a
communications protocol that can report a large quantity of zone numbers
(and user codes) quickly, accompanied with a high degree of reliability.
The data on the following line represents how an actual FBI Superfast
transmission is displayed by the CP-220A:
1234 B1 036
in which:
1234 refers to the subscriber's Account Number
B1 refers to the Event Code and Zone Type
036 refers to the actual Zone Number
NOTE: The FBI Superfast format may be used on the CP-220A with a
Version 3.3 (or later) REC-5 Memory Card ONLY when configured
as an FBI receiver (see PARAMETER 02) with REC-1 Line Cards
and/or REC-11 Line Cards having a Version of 2.46 or later.
The purpose of PARAMETER 47 (like PARAMETER 28) is to provide
8-character customized English Language descriptions to accompany the
display (and printout) of messages received by the CP-220A. While
PARAMETER 28 applies to standard reporting formats, PARAMETER 47 is
for FBI Superfast messages only. This allows the Central Station's operators
to quickly determine the nature of the report when looking at the display or
the resulting printout.
is used, the name of the next parameter appears
M/DD/YY HH:MM:SS
Hook-Up and Installation Manual