Pitney Bowes SV62214 Operator's Manual page 38

Using Differential Weighing
9. If using the moistener, place flap
along moistener and move towards
the right.
10. Place the envelope up against the
registration wall of the sys tem and
slide it to the right until the sys tem
grasps it. The system prints the me-
ter stamp and ejects the envelope/
tape sheet.
11. The same screen from Step 7 appears.
DIFF. WEIGHING
Remove one mailpiece
TOTAL:
Repeat steps 7 -10 for each item that needs postage.
12. When you have removed the last item from the scale, the "LAST
ITEM" screen displays.
LAST ITEM
◄Rate this item
◄Exit Diff. Weighing
◄Continue
Rate this item – select this option if you want to rate the last
piece removed. A ready to print postage screen displays.
Follow Steps 8-11 above. The Home screen displays when
you are done.
Exit Diff. Weighing – select this option if you want to exit this mode
without rating the last item. The Home screen displays.
Continue – select this option if you want to continue rating more
items with the same rate. A "Place mail on scale" screen dis-
plays. Follow Steps 7-11 above to continue.
SV62214 Rev. A
xlb. x.xoz
3 • Running Mail
3-7