Samsung Officeserv 7100 Technical Manual page 11

OfficeServ 7100
TECHNICAL MANUAL
In MMC 712, program the following entries:
MMC 712
LCR ROUTE TIME CHANGE
1 1
2 1
In MMC 713, program the following:
MMC 713
INDEX NO. OF DELETE
DIGITS (15)
001 4
NOTE: The deleted digits are the 1 + AAA from the LCR digit table in MMC 710.
In MMC 603, move all of the C.O. lines from trunk group 9 to trunk group 800. You
will have to delete the line numbers from trunk group 9 as trunks can be in more
than one group.
In MMC 724, assign 9 as the LCR access code. This will delete 9 from the first trunk
group automatically.
In MMC 210, turn on LCR.
Setting LCR up like this will not prevent C.O. lines being accessed by Direct Trunk (DT)
keys but it does mean that speed dial numbers will have to be reprogrammed to allow
them to access LCR.
LCR ROUTE TABLE
LCRCOS TRK GROUP
1 800
1 800
LCR MODIFY DIGIT TABLE
NO. OF INSERT
DIGITS (14)
2.4.3
Table of Contents
Home Page
SPECIAL APPLICATIONS
PART 2 APRIL 2007
MOD DIGITS
001
NO. OF APPEND
DIGITS (14)