Samsung Officeserv 7100 Technical Manual page 67

OfficeServ 7100
TECHNICAL MANUAL
9. Put the trunks for each network link into their own trunk group.
e.g. in switch 001 put the trunks to switch 002 in group 802 and the trunks to switch
003 in 803.
10. Set up LCR routes in MMC 712 to allow LCR to access the network links.
MMC 712. LCR Route Table
Route table to select trunks for LCR.
The meaning of each field is as follows.
• (01~32) : Index numbers of route tables.
• (1~4): Time table number assigned in MMC 711.
• C: LCR class assigned in MMC 310.
• G
: Trunk group number.
• M
: The modified table number in MMC 713 that is in need of modification.
• Assuming, the user usually uses VoIP networking, but uses PRI networking only
when VoIP signaling trunks are not available, LCR class in MMC 310 should be
2 or higher, and "C:1 G:801", "C:2 G:802". Here, 801 is a trunk group consisting
of VoIP signaling trunks and 802 is trunk group consisting of networking PRI
trunks.
e.g. for switch 001 the route could be route 2 to access switch 002 set up as 02:1
C:1 G:802 M:_ _ _
Route 3 to access switch 003 set up as 03:1 C:1 G:803 M:_ _ _
MMC 713. LCR Modify Table
Assigned when conversion is needed for outgoing call.
The meaning of each field is as follows.
• (001~200): Index numbers of translation tables.
• NOF DEL DGT: Number of digits which will be deleted. Only beginning of digits
can be deleted.
• I: Digits inserted in front of the outgoing digits, if needed.
• A: Digits appended behind the outgoing digits, if needed.
11. Set up the LCR digit tables in MMC 710 to allow access to the network link routes.
MMC 710. LCR Digit Table
Assigns route table according to the numbers entered.
The meaning of each field is as follows.
2.8.6
Table of Contents
Home Page
SPECIAL APPLICATIONS
PART 2 JANUARY 2009