Samsung Officeserv 7100 Technical Manual page 65

OfficeServ 7100
TECHNICAL MANUAL
This information is entered in MMC 724 in the network LCR area (NTWK LCR
NUMPLAN).
MMC 724. Numbering Plan
• STN DIAL NO.: A non-conflicting range of station numbers should be
assigned across all the nodes in the network.
• STNG DIAL NUMBER: A non-conflicting range of station group numbers
should be assigned across all the nodes in the network.
• NTWK LCR DIAL NO: Numbers used to call a station in another system are
assigned. This number is converted to node number + station number in
MMC 824, and placed in the destination.
• VOIP NET DIAL NO: For VoIP networking, these are virtual trunks for
signaling. They should be assigned to trunk groups in MMC 603.
• MGI DIAL NO: These are the channel numbers of the MGI card for voice.
They do not need to be set for networking, but should be assigned in the
VoIP network group in MMC 615.
5. MMC 824. Networking LCR Translation
For this program, networking dial number in MMC 724 should be assigned. When
index 01 is assigned "22" in networking, dial number in MMC 724,
Enter like for the conversion to node number + station number.
w
01:22 →
q
SZ:0 MAX:00 MB:N
In , the meaning of each field is as follows.
w
• 01: Index for NTWK LCR DIAL NO in MMC 724.
• 22: NTWK LCR DIAL NO in MMC 724.
• 09122: Node number(091) + station number(22). The system whose node id is
"091" has the station numbers 2200 ~ 2299. Added node number should be
assigned to "DIGIT" in MMC 710.
• SZ:4 means the user dials 4 digits when he/she calls node number "091" +
station number starting "22".
• MAX:07: Total number of digits in node number + station number. This is very
important in "ENBLOCK" dial. When the system receives 7 digits, it does not wait
for more digits and makes the call using LCR.
01:22 →09122
w
SZ:4 MAX:07 MB:N
2.8.4
Table of Contents
Home Page
SPECIAL APPLICATIONS
PART 2 JANUARY 2009
is displayed.
q