Zte ZXR10 5900E Series Configuration Manual page 64

ZXR10 5900E Series Configuration Guide (IPv4 Routing)
S3(config)#interface vlan20
S3(config-if-vlan20)#ip address 30.0.2.1 255.255.255.252
S3(config-if-vlan20)#exit
S3(config)#interface loopback1
S3(config-if-loopback1)#ip address 2.2.2.1 255.255.255.0
S3(config-if-loopback1)#exit
S3(config)#router rip
S3(config-rip)#network 30.0.1.0 0.0.0.3
S3(config-rip)#network 30.0.2.0 0.0.0.3
S3(config-rip)#network 2.2.2.0 0.0.0.255
S3(config-rip)#exit
The information related to S3 cannot be displayed in the OSPF area.
3. Run the following commands to redistribute RIP routes on S1:
S1(config)#router ospf 1
S1(config-ospf-1)#redistribute rip
S1(config-ospf-1)#exit
The information of 2.2.2.0 network segment is displayed on S2.
S2#show ip forwarding route
IPv4 Routing Table:
Dest
1.1.1.3
2.2.2.0
30.0.0.0
30.0.0.2
Run the following commands to redistribute directly-connected routes on S1:
S1(config)#router ospf 1
S1(config-ospf-1)#redistribute connected
S1(config-ospf-1)#exit
The information of network segment 30.0.1.0 is displayed on S2.
S2#show ip forwarding route
IPv4 Routing Table:
Dest
1.1.1.2
1.1.1.3
2.0.0.0
30.0.0.0
30.0.0.2
30.0.1.0
SJ-20150114102049-003|2015-01-15 (R1.0)
Gw Interface
1.1.1.3 loopback1
30.0.0.1 vlan10
30.0.0.2 vlan10
30.0.0.2 vlan10
Gw Interface
30.0.0.1 vlan10
1.1.1.3 loopback1
30.0.0.1 vlan10
30.0.0.2 vlan10
30.0.0.2 vlan10
30.0.0.1 vlan10
3-32
Owner pri metric
address 0 0
ospf 110 20
direct 0 0
address 0 0
Owner pri metric
ospf 110 20
address 0 0
ospf 110 20
direct 0 0
address 0 0
ospf 110 20
ZTE Proprietary and Confidential