Reset - Samson 3725 Mounting And Operating Instructions

Positioner that has not been initialized
Touch or for a long time to move the valve manually.
The valve is only moved in one direction uncontrolled. The bar elements on the display indi-
cate the change in direction.
Touch to deactivate manual mode.
Note
The Manual mode function can only be exited as described or by interrupting the electrical
supply (cold start). The positioner does not automatically exit this function and return to the
display showing the status indication.

7.11 Reset

A reset causes an initialization to be undone and all parameters settings are reset to the de-
fault settings (see code list in section 11.2).
Note
The fault indication icon is displayed after a reset since the positioner needs to be re-initial-
ized. The error code E2 is also activated (see section 9.2).
EB 8394 EN
Enable configuration as described in section 7.2.
1. Touch or
2. Press and hold for six seconds. 6...5...4...3...2...1 is counted
down on the display.
RST blinks while
process is completed and the display returns to status indication (P0).
until Code P18 appears.
is pressed. As soon as the key is released, the reset
Operating the positioner
59