Adapting The Display; Enabling Configuration To Change Parameters - Samson 3725 Mounting And Operating Instructions

7.1 Adapting the display

The display reading direction can be rotated by 180°. If the displayed data appear upside
down, proceed as follows:

7.2 Enabling configuration to change parameters

Before changing parameter settings in an initialized positioner, configuration must be en-
abled first by selecting Code P19:
Note
If no settings are entered within three minutes, the enabled configuration function becomes
invalid.
EB 8394 EN
1. Touch or
2. Press to confirm the selected code. P1 blinks.
3. Touch or
4. Press to confirm display direction.
LOCK and the key icon indicate that the configuration is locked. De-
activate locking as follows:
1. Touch or
to confirm the selected code. P19 blinks.
2. Press
3. Touch or
4. Press to enable configuration.
until Code P1 appears.
until the display is set in the desired direction.
until Code P19 appears.
until OPEN is displayed.
Operating the positioner
51