Display - Samson 3725 Mounting And Operating Instructions

6.1.3

Display

Icons which are assigned to certain codes and functions are indicated on the display
(Fig. 18). The bar elements indicate the system deviation that depends on the sign (+/–) and
the value. One bar element appears per 1 % system deviation.
If the positioner has not yet been initialized, the lever position in degrees in relation to the
mid-axis is indicated. One bar element corresponds to approximately a 7° angle of rotation.
If the fault indication icon
E0 to E15 error codes (see section 9.2).
Down
Operation locked
Fail-safe position active
Parameter/error code
Reading
ESC
Err
LOW
MAN
MAX
RST
INIT
ON/OFF
ZERO
Fig. 18: Display with all readings
EB 8394 EN
is displayed, press
S
Meaning
Stop
Malfunction
w too low
Manual mode
Maximum range
Reset
Initialization
Activated/deactivated
Zero calibration
or until ERR is displayed to view the
Confirm
mm
%
Operation
Up
Settings not yet saved in a
non-volatile memory
Unit
Bar graph for system
deviation
Fault
Manual mode
Closed-loop control
49