GE Reason H49 Technical Manual page 153

GE Reason H49
12.2.2.5 PTP
Command
ptp -m -l -f -p1 -p2 -a -s -c -n
-S
ptp –m ordinary –l p2p –f power_2011 –p1 128 –p2 128 –a 0 –s 2 –c 4 –n 0 –s 1
12.2.2.6 Timezone
Example of command
timezone -z <time zone>
12.2.2.7 Banner Text
12.2.2.7.1 Change Banner Text
Example of command
bannertext -M "message"
H49/EN M/C22
The example below shows the use of the
Sets the IEEE1588-v2 PTP configuration i.e. the operating mode, delay,
profile, domain, and step together with the IEEE1588-v2 prority1 and 2,
the priority code point (PCP) of the PTP frames and the VLAN used.
Example:
The examples below show the use of the
Sets the H49 time zone
Example:
timezone –z/Europe/Andorra
The examples below show the use of the
Updates the banner text with a message
Example:
bannertext –M "This is a banner text"
Technical Manual
ptp command line:
Description
timezone command line:
Description
bannertext command line:
Description
153