Figure 84: Reason H49 Web User Interface - Ldap Server Settings - GE Reason H49 Technical Manual

Technical Manual
7.4.3.3 LDAP Server
100
This page allows configuring the LDAP server for remote authentication.
The information in this page is used when the LDPA authentication mode is selected
in the Security > Security Settings page (see Security Settings section).
Figure 84: Reason H49 Web User Interface – LDAP Server Settings
Attribute
LDAP Server IP address
LDAP Server FQDN
Port
TLS
Base DN
Authentication Mode
User DN
Password
Connection Timeout
Description
LDAP Server's IP address (for instance 10.17.10.10)
Complete domain name of the LDAP Server using the Fully
Qualified Domain Name (FQDN), for instance kiwi.dsagile.intern.
Communication port used by the LDAP servers
Enables the TLS encryption over the LDAP communication
channel
Base Distinguished Name in the LDAP server
Authentication access mode to the LDAP server:
•
Simple
•
Anonymous
User account authorized to request data to the LDAP server. It
shall be provided if the Simple Authentication Mode is selected.
Password associated to User DN
Connection timeout in seconds used for the queries sent to the
LDAP server.
After timeout, the client considers that the requested server is
out of service.
GE Reason H49
H49/EN M/C22