GE Reason H49 Technical Manual page 141

GE Reason H49
Note:
Unsupported settings are passed directly to the SNMP configuration without further checking. In the same manner, unsupported
settings cannot be modified by using the
The list of currently supported settings may evolve over time. Use the
supported. For further detail, please refer to http://www.net-snmp.org/docs/man/snmpd.conf.html.
H49/EN M/C22
•
group
•
includeAllDisks
•
iquerySecName
•
load
•
monitor
•
proc
•
rocommunity
•
rouser
•
rwcommunity
•
rwuser
•
sysContact
•
sysLocation
•
sysName
•
sysServices
•
trap2sink
•
trapsink
•
view
command; they shall be deleted prior to being re-set.
set
command to see which settings are currently
snmp -i
Technical Manual
141