Figure 47: Reason H49 Web User Interface - Snmp Version Section - GE Reason H49 Technical Manual

GE Reason H49
H49/EN M/C22
The content of this page depends on the selected SNMP version.
Reason H49 supports three versions of SNMP:
•
SNMPv1: SNMPv1 uses a community string for authentication. The SNMP agent
accesses all objects with read-only permissions using the community string public
and/or all objects with read/write permissions using the community string
private.
•
SNMPv2c: SNMPv2c is a later version of the SNMP protocol. It supports the same
community-based security standard.
•
SNMPv3: SNMPv3 is the most secure protocol. It supports the View-Based Access
Control Model and User-Based Security Model along with encryption and
Authentication features.
The following table summarizes the sections corresponding to each SNMP version.
Communities
Groups
Users
Views
Access configurations
Throughout the page:
•
Click the + button to add a new element and set the related attributes as detailed
below,
•
Click the remove button in front of the desired row, to delete an element from a
section.
SNMP Version selection
From the SNMP mode drop-down list, select the desired SNMP protocol version to be
used to manage the switch:
Figure 47: Reason H49 Web User Interface – SNMP Version Section
Technical Manual
V1 V2C
Yes Yes
Yes Yes
No No
Yes Yes
Yes Yes
V3
No
Yes
Yes
Yes
Yes
71