Beretta EXCLUSIVE R Installer And User Manual page 33

Press the "up" and "down" keys to select the desired time band and press
"ok" to confirm the selection.
START END
07:30 08:30
11:30 13:30
18:00 22:30
USE THE ARROWS TO MODIFY
To confirm or cancel the selection made, highlight the corresponding option
and confirm it by pressing "ok".
In order to confirm that the operation has been completed successfully, the
display will show the table with the selected time frame flashing just before
deleting it from the table.
START END
07:30 08:30
11:30 13:30
18:00 22:30
CONFIRM OR DELETE SELECTION
13.4 Copy
This function serves to copy the scheduled programme for the selected day.
Press "ok" to select the function, after having highlighted it (if necessary)
using the "up" and "down" keys.
START END
07:30 08:30
11:30 13:30
18:00 22:30
SELECT OPTION
Press the "up" and "down" keys to select the day on which to copy the
hourly schedule and press "ok" to confirm the selection.
SELECT DAYS ON WHICH YOU WANT
TO COPY SCHEDULE OF THURSDAY
MON TUE
USE THE ARROWS TO MODIFY
The day will be highlighted and others can be selected using the same
procedure.
When finished highlight
CONFIRM
SELECT DAYS ON WHICH YOU WANT
TO COPY SCHEDULE OF THURSDAY
MON TUE
USE THE ARROWS TO MODIFY
MAIN
THURSDAY
SELECT
PERIOD TO
DELETE
MAIN
THURSDAY
ARE YOU SURE
TO DELETE
THE PERIOD ?
CONFIRM
CANCEL
MAIN
THURSDAY
ADD
MODIFY
DELETE
COPY
MAIN
WED THU FRI
SAT SUN
CONFIRM
and press "ok".
MAIN
WED THU FRI
SAT SUN
CONFIRM
In order to confirm that the operation has been completed successfully, the
display will show the list of days to which the scheduled programme has
been copied.
SCHEDULE OF THURSDAY
WILL BE COPIED ON THE DAYS :
TUESDAY
USE THE ARROWS TO MODIFY
14 FAULTS
If any faults should occur, a screen will appear on the display indicating
the relative error code and a brief alphanumeric description of the same.
Pressing the "back" button it is possible to return to the main screen,
where a fault is signalled by this flashing icon
The user can return to the fault description screen by using the "up" and
"down" keys and then pressing the "ok" key. The faults description screen
is automatically displayed once the display illumination time has elapsed
without any button being pressed.
Press the "up" and "down" keys to display the descriptions of any other
faults that may be present.
FRI
18/05/2013
MENU
INFO
HOT WATER TEMPERATURE
or fault E041
F
If the pressure drops below the safety threshold of 0.3 bar the boiler displays
the fault code "E041 - WATER TRANSDUCER LOAD THE SYSTEM" for a
transitional time of 10 min during which it is possible to open the external
filling tap until the pressure is between 1 and 1.5 bar.
WATER TRANSDUCER
LOAD THE SYSTEM
b
If the pressure drops frequently, contact the Technical Assistance
Centre.
For fault E091
The boiler has an auto-diagnostic system which, based on the total number
of hours in certain operating conditions, can signal the need to clean the
primary heat exchanger.
The intervention of the Technical Assistance Centre is necessary.
MAIN
.
PLANT
12:17
1.3 bar
STATE
42
°C
SET
E041
ENGLISH
33