Network Settings - LG LDV-S504 Owner's Manual

Network Settings

Network Settings
TCP/IP
DHCP :
DHCP stands for Dynamic Host Configuration
Protocol.
- ON : Network settings of this unit configure auto-
matically from the DHCP server.
If you set to On, the IP Address, Subnet Mask,
Gateway, Primary DNS and Secondary DNS
options are dimmed and not to set these options.
- OFF : Enter the network settings manually.
IP Address : Enter an IP address using the virtual
keyboard.
Subnet Mask : Enter a subnet mask address using
the virtual keyboard.
Gateway : Enter the gateway address using the
virtual keyboard.
Primary DNS : Enter the Main DNS server address
using the virtual keyboard.
Secondary DNS : Enter the Sub DNS server
address using the virtual keyboard.
TCP/IP Port No. : Enter the TCP/IP Port number
using the virtual keyboard. You watch the surveil-
lance live image over the network with the PC
Client program. Factory default port for transmis-
sion of video and audio data is 9001. However in
some cases it is better to change this port number
for added flexibility or security. If desired change
the port number (1025 ~ 65535).
Web Server Port No. : Enter the Web Sever Port
number using the virtual keyboard. You watch the
surveillance live image over the network with a web
browser. Typically the TCP port used by HTTP is
80. However in some cases it is better to change
this port number for added flexibility or security. If
desired change the port number (80 or 1025~
65535).
Bandwidth : Enter the Bandwidth using the virtual
keyboard to adjust the data traffic (1~100Mbps).
32
Note :
When you change the TCP/IP Port or Web Sever
Port Number, the all connections with the PC Client
programs or web browser will be connected.
DDNS (Dynamic Domain Name
Server)
User Name : Enter the User name registered in
DDNS using the virtual keyboard.
Password : Enter the Password for the user
entered in [User Name] using the virtual keyboard.
Note :
The DDNS function is serviced using TCP 8245 port
by "No-IP"(http://www.no-ip.com/).
In case the DVR is used in the network system with
fire wall, you have to open the TCP 8245 port in
order that DDNS data can get into fire wall. For more
detail fire wall setup, ask your network administrator
and/or network service provider.
Notification
You can set the notification by E-mail for user.