Table of Contents
Advertisement
CLIENT PROGRAM
Client Program is the network program of the LDV-
S504 and LDV-S503. This manual is written based on
LDV-S504 (16 channels).
The description pictures may differ from your OS
(Operating System) type. The pictures used in this
manual are based on Windows XP.
Note :
Do not use the other application with this client pro-
gram. It cause the memory shortage and the client
program malfunction.
PC Requirements
PC Requirements
x OS (Operating System) : Windows 2000 or high-
er, DirectX 8.1 or higher.
x CPU : Intel Pentium III or higher, AMD Athlon with
800 MHz or higher.
x RAM : 512 MB or higher.
x Graphics Card : AGP VGA with 64 MB Video
RAM or higher.
Recommended PC Requirements
• OS : Windows XP
• CPU : Intel Pentium IV
• RAM : 512 MB
• Graphics Card : AGP VGA with 128 MB Video RAM
Client Program Installation
Client Program Installation
1. Insert Client Program CD then it will be started by
automatically.
If the disc does not run automatically on your PC,
open the Client Program CD and install the pro-
gram manually.
2. Run the [LDV-S500 Network Client Installer.exe].
Install menu is displayed.
Click [Next] icon.
3. Designate a folder for Client Program and click
[Next] icon.
4. Click [Install] icon to start installation.
5. After Client program installed, click the [Finish]
icon to exit program.
Note :
Refer to InstallShield Wizard window for more details.
45
Advertisement
Table of Contents
