Table of Contents
Advertisement
Output
Relay Off
l
-
ALARM ACKNOWLEDGE: Use the ALM.OFF
button to stop alarm.
-
POST-ALARM TIME: The alarm is stopped
after post-alarm time.
Network Settings
TCP/IP
DHCP:
l
DHCP stands for Dynamic Host Configuration
Protocol.
- ON: Network settings of this unit are configured
automatically by the DHCP server.
If you set to ON, the [IP Address], [Subnet Mask],
[Gateway], [Primary DNS] and [Secondary DNS]
options are dimmed and these options are not set.
- OFF: Enter the network settings manually.
IP Address: Enter an IP address using the virtual
l
keyboard.
Subnet Mask: Enter a subnet mask address using
l
the virtual keyboard.
Gateway: Enter the gateway address using the vir-
l
tual keyboard.
Primary DNS: Enter the Main DNS server address
l
using the virtual keyboard.
Secondary DNS: Enter the Sub DNS server
l
address using the virtual keyboard.
TCP/IP Port: Enter the TCP/IP Port number using
l
the virtual keyboard. You can watch the live surveil-
lance image over the network with the PC Client
program. The factory default port for transmission
of video and audio data is 9001. However in some
cases it is better to change this port number for
added flexibility or security. If desired change the
port number(1025 ~ 65535).
Web Server Port: Enter the Web Sever Port num-
l
ber using the virtual keyboard. You can watch the
live surveillance image over the network with a web
browser. Typically the TCP port used by HTTP is
80. However in some cases it is better to change
this port number for added flexibility or security.
If desired change the port number (80 or 1025~
65535).
Bandwidth Throttle: Enter the Bandwidth to adjust
l
the data traffic.
Note:
When you change the TCP/IP port or web sever port
number, all connections with the PC Client programs
or web browser will be disconnected.
DDNS (Dynamic Domain Name System)
User Name: Enter the DDNS registered user name
l
using the virtual keyboard.
Password: Enter the user password in
l
[User Name] using the virtual keyboard.
Note:
The DDNS function is serviced using a TCP 8245
port by "No-IP"(http://www.no-ip.com/).
In case the DVR is used in the network system with a
firewall, you have to open the TCP 8245 port so that
DDNS data can get into firewall. For more detail on
firewall setup, ask your network administrator and/or
network service provider.
35
Advertisement
Table of Contents
